Atmizone introduces the Creek, our new 22mm RDA for ideal single-coil setups. Squonk-ready out of the box, the Creek also includes both MTL and DL oriented options in the package.
Its design allows juice bottom feed, while at the same time driving air right under the coil.
Check out the features tab for some really interesting details about it.
Creek’s juice well is designed with a capacity of at least 1.2ml (depending on cotton used), offering great autonomy. The deck makes rebuilding really straightforward, with the design of its posts, auxiliary “rails” on top, and well-sized phillips pan head post screws helping for this purpose. It can host various types of single coil setups, from small up to large exotic type coils. The inner formation of the Top Cap, together with the deck parts design, create an ideal vaporisation chamber, which prevents condensations to reach up to the drip tip with ease, also being leak-proof when vaping or carrying the device around. What’s more: The Top Cap collaborates with the Base / deck via a smart one-way locking mechanism, which allows instant access to deck but at the same time ensures safety against unwanted access from children (TPD compliant) or opening the device by accident.
With this BF RDA, Atmizone’s airflow concept includes four parts collaborating in a simple but effective way, in order to regulate and drive air from the side of the Top Cap until it reaches right under the coil. Air is regulated via the small / large side slot of the Top Cap, then goes through slots of Base, Pos Post Insulator and path of Pos Post respectively, so that the air flow finally comes to the resistance from beneath. This helps to optimise vaporisation and enhances flavour, while allowing the juice bottom feeding function to work flawlessly.
MTL or DL?
The Creek is actually suitable for both MTL and DL vaping. This is achieved by installing the Positive Post made for each vaping style, both coming right out of the box. Each Positive Post features a proper sized path of air flow inside. One DL oriented with cross section similar to a hole D≥4mm and one MTL oriented with cross section similar to a hole D≥2mm. Likewise, Creek’s Top Cap design incorporates one different side slot on each side, one large / DL oriented with cross section similar to a hole D≥4mm and one small / MTL oriented with cross section similar to a hole D≥2mm. Long story short: You choose the Pos Post you prefer and regulated it with the corresponding side slot of the Top Cap.
The drip tips
Product package brings you two different wide bore drip tip designs. They are both delrin to reduce heat but also serve as adapters for 510 drip tips. This way you may vape directly if you vape DL, or use your own favourite MTL drip tip on top if you vape MTL. Trying to take all details into account, collaboration between Top Cap and drip tips is normally tight in order to allow dripper function by removing the drip tip, but there is also an alternative o-ring which is included in the box for extra tight collaboration between drip tip and Top Cap.
Before using Creek for the first time, it is strongly recommended that you take a good look at the support section , with tons of useful info about Creek, including detailed introduction, assembly/disassembly guides, useful tips etc.
What’s in the box
– 1 x Creek BF RDA (1 x MTL Pos Post, 1 x BF Pole, 1 x “A” Drip Tip pre-installed)
– 1 x Set of spares (2 x Post Screws, 1 x O-ring Kit, 1 x Blind Pole, 1 x DL Pos Post, 1 x Hex Key 2mm, 1 x “B” Drip Tip)
– 1 x User Guide
– 1 x Warranty Card
Compliance with Regulations
Tobacco Products Directive 2014/14/EU (TPD)
This is a TPD compliant product, EC-ID 01184-18-00005