Blog

When mentioning the words BF RDA, most vapers think of a rebuildable atomiser with the juice being fed either bottom side (squonk mode) or via dripping and its airflow coming sideways. Whenever we discuss about dripper design here in Atmizone, our team’s first thought is that we like the vaping…

We have been following Billet Box news and updates since the very beginning, late 2012. It came in at a time when full-mech mods where prevailing and you could only see tubes around. Boxes were considered “big” back then, and electronic meant “chip, low quality with minimum power”. The Billet…

Vape tanks are understated. We thought this is not fair, so we decided to combine the keyword phrases “vape tank”, “factory coils” and “high-end elegance”, in one new project. Our basic principles of simplicity in function and design remain intact, only that, this project is dedicated to sub-ohm vaping. We…

Who wouldn’t agree? Building your own coils is much better than using ready-made, factory replacements coils. We have asked for your opinion on Facebook and Twitter. The answers have been more than predictable: “I like to make my own builds with the wire that i want and test it if…

As the Public Testing Period of the Wave is officially over since some days now, this is the right time for all of us to evaluate the results with a clear mind. This has been a difficult but really interesting process. As far as the public testing questionnaire is concerned,…

[ssc_gallery link=”file” include=”13420,13449″ columns=”2″] The List of DOS and DON’TS and the Wave RTA Design When conceiving the initial design of the Wave, we had plans to make an absolutely targeted atomiser, with the purpose to cover specific needs of both ours and the vaping community around us. Before starting…

[ssc_gallery link=”file” include=”13361,13359″ columns=”2″] Intro “…Innovation is a new idea, more effective device or process.[1] Innovation can be viewed as the application of better solutions that meet new requirements, inarticulated needs, or existing market needs.[2] This is accomplished through more effective products, processes, services, technologies, or ideas that are readily…

[ssc_gallery link=”file” include=”12425,12424″ columns=”2″] Following the official announcement of the Wave RTA project and over the past months, our inbox has been receiving many similar inquiries that can be categorised under two simple questions: “When will the Wave be released?” and “How is it gonna be like?” It makes sense….

Team Atmizone is already three years old. It ’s been three full years since everything started. We couldn’t have imagined we would reach that far then. There was an amateur rock band back in 2011. When Jimmy came in that Sunday afternoon, to be interviewed as the new guitarist, Tasos,…

[ssc_gallery link=”file” include=”10682,7476″ columns=”2″] Fall is fast approaching, but the summer souvenirs keep coming in! Time to add some summer sprinkle in your vaping gear with the new, colourful Bayou 19 versions. Built from the same food-grade material as our feather-light Plexi Clear edition, the new PMMA Bayou 19s are…

The release of the Lab has been a milestone for Atmizone. It was not the first high-performance mech device in the market, and it certainly wasn’t the first mech device to feature dedicated protection circuitry. However, it is the only one in the market that did both, gracefully. The importance…

[ssc_gallery link=”file” columns=”2″ include=”9989,9985,9986,9987,9989″] If there’s one thing to say about the recently released Lab, it would be something along these lines: It’s never too late for a change of opinion. With its unique design, incredible performance and safety features, the Lab quickly became a big success while breaking 3…

We have been familiar with Yota’s peculiar forms, colours and canvas stories since the early days of Atmizone. An active visual artist and avid vaper, Yota was among the first to discover Atmizone’s devices and appreciate them for their simple, unobtrusive forms. We always saw an analogy between our own…